page 1 of 2 www.pduke.com 2014/4/30 fdc05(w) series 5 watts dc-dc converter input specifications input voltage range fdc05 fdc05-w 12vdc nominal input 24vdc nominal input 48vdc nominal input 24vdc nominal input 48vdc nominal input 9 ~ 18vdc 18 ~ 36vdc 36 ~ 75vdc 9 ~ 36vdc 18 ~ 75vdc input filter pi type input surge voltage 12vdc input 24vdc input 48vdc input 36vdc 100ms, max. 50vdc 100ms, max. 100vdc 100ms, max. input reflected ripple current 20map-p start up time nominal input and constant resistive load power up 450ms, max. remote on/off (option) (note 6) (positive logic) (negative logic) dc-dc on dc-dc off dc-dc on dc-dc off open or 3.5v < vr < 12v short or 0v < vr < 1.2v short or 0v < vr < 1.2v open or 3.5v < vr < 12v input current of remote control pin nominal input -0.5ma ~ +1ma remote off state input current nominal input 2.5ma environmental specifications operating ambient temperature (reference derating curve) standard m1 (note 7) m2 (w series) -25oc ~ +85oc (with derating) -40oc ~ +85oc (non-derating) -40oc ~ +85oc (with derating) maximum case temperature +100oc storage temperature range -55oc ~ +125oc thermal impedance (note 8) natural convection natural convection with heat-sink 12oc/watt 10oc/watt thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh emc characteristics emi en55022 class a class b esd en61000-4-2 air contact 8kv 6kv perf. criteria b radiated immunity en61000-4-3 10 v/m perf. criteria a fast transient (note 9) en61000-4-4 2kv perf. criteria b surge (note 9) en61000-4-5 1kv perf. criteria b conducted immunity en61000-4-6 10 vr.m.s perf. crite ria a output specifications output power 5 watts, max. voltage accuracy 1% minimum load 0% line regulation ll to hl at full load 0.2% load regulation no load to full load single dual 0.2% 1% cross regulation (dual) asymmetrical load 25% / 100% fl 5% ripple and noise 20mhz bandwidth see table temperature coefficient 0.02% / oc, max. transient response recovery time 25% load step change fl to 1/2 fl 1% error band single 200 s dual 200 s over load protection % of fl at nominal input 170% short circuit protection continuous, automatics recovery general specifications efficiency see table isolation voltage input to output input (output) to case 1600vdc, min.1minute 1600vdc, min.1minute isolation resistance 500vdc 10 9 ohms, min. isolation capacitance 300pf, max. switching frequency standard ?w? series 300khz10% 200khz10% safety approvals iec60950-1, ul60950-1, & en60950-1 case material nickel-coated copper base material non-conducted black plastic potting material epoxy (ul94 v-0) dimensions 2.00 x 1.00 x 0.40 inch (50.8 x 25.4 x 10.2 mm) weight 27g (0.95oz) mtbf (note 1) mil-hdbk-217f 7.066 x 10 6 hrs t e c h n i c a l s p e c i f i c a t i o n all specifications are typical at nominal input, ful l load and 25oc otherwise noted features ? 5 watts output power ? output current up to 1000ma ? standard 2.00 x 1.00 x 0.40 inch package ? high efficiency up to 83% ? 2:1 and 4:1 wide input voltage range ? six-sided continuous shield ? fixed switching frequency ? ul60950-1, en60950-1, & iec60950-1 safety approvals ? ce marked ? compliant to rohs ii & reach options negative & positive logic remote on/off description the fdc05 and fdc05-w series offer 5 watts of outpu t power from a 2 x 1 x 0.4 inch package without derating to 71oc ambie nt temperature. fdc05 series have 2:1 wide input voltage of 9~18vdc, 18~36vdc and 36~75vdc. fdc05-w series have 4:1 ultra wide input v oltage of 9~36vdc and 18~75vdc. applications wireless network telecom/datacom industry control system measurement equipment semiconductor equipment
page 2 of 2 www.pduke.com 2014/4/30 fdc05(w) series 5 watts dc-dc converter fdc05-48s05 derating curve fdc05-48s05 derating curve with heat-sink (note 8) fdc05-48s05 efficiency vs input voltage fdc05-48s05 efficiency vs output load 69 71 73 75 77 79 81 83 36 40 44 48 52 56 60 64 68 72 75 input voltage(v) efficiency(%) 50 55 60 65 70 75 80 85 10 20 30 40 50 60 70 80 90 100 % of full load efficiency(%) pin connection pin single dual 1 +input +input 2 -input -input 3 +output +output 4 no pin common 5 -output -output 6 ctrl (option) ctrl (option) output current model number input range output voltage min. load full load output ( 2 ) ripple & noise no load ( 3 ) input current eff ( 4 ) (%) capacitor load max (5) fdc05-12s33 9 ~ 18 vdc 3.3 vdc 0ma 1000ma 50mvp-p 10ma 76 3700 f fdc05-12s05 9 ~ 18 vdc 5 vdc 0ma 1000ma 50mvp-p 10ma 79 1700 f fdc05-12s12 9 ~ 18 vdc 12 vdc 0ma 470ma 50mvp-p 10ma 81 290 f fdc05-12s15 9 ~ 18 vdc 15 vdc 0ma 400ma 50mvp-p 15m a 80 188 f fdc05-12d05 9 ~ 18 vdc 5 vdc 0ma 500ma 50mvp-p 20ma 79 850 f fdc05-12d12 9 ~ 18 vdc 12 vdc 0ma 230ma 50mvp-p 15ma 81 140 f FDC05-12D15 9 ~ 18 vdc 15 vdc 0ma 190ma 50mvp-p 20ma 82 47 f fdc05-24s33 (w) 18 ~ 36 (9 ~ 36) vdc 3.3 vdc 0ma 1000ma 50mvp-p 15(5ma) 73 (77) 3700 f fdc05-24s05 (w) 18 ~ 36 (9 ~ 36) vdc 5 vdc 0ma 1000ma 50mvp-p 15(5ma) 78 (80) 1700 f fdc05-24s12 (w) 18 ~ 36 (9 ~ 36) vdc 12 vdc 0ma 470ma 50mvp-p 10(5ma) 81 (82) 290 f fdc05-24s15 (w) 18 ~ 36 (9 ~ 36) vdc 15 vdc 0ma 400ma 50mvp-p 20(5ma) 81 (81) 188 f fdc05-24d05 (w) 18 ~ 36 (9 ~ 36) vdc 5 vdc 0ma 500ma 50mvp-p 15(5ma) 79 (80) 850 f fdc05-24d12 (w) 18 ~ 36 (9 ~ 36) vdc 12 vdc 0ma 230ma 50mvp-p 20(5ma) 82 (82) 140 f fdc05-24d15 (w) 18 ~ 36 (9 ~ 36) vdc 15 vdc 0ma 190ma 50mvp-p 20(10ma) 81 (83) 47 f fdc05-48s33 (w) 36 ~ 75 (18 ~ 75) vdc 3.3 vdc 0ma 1000ma 50mvp-p 5(5ma) 73 (73) 3700 f fdc05-48s05 (w) 36 ~ 75 (18 ~ 75) vdc 5 vdc 0ma 1000ma 50mvp-p 10(10ma) 76 (76) 1700 f fdc05-48s12 (w) 36 ~ 75 (18 ~ 75) vdc 12 vdc 0ma 470ma 50mvp-p 10(10ma) 82 (82) 290 f fdc05-48s15 (w) 36 ~ 75 (18 ~ 75) vdc 15 vdc 0ma 400ma 50mvp-p 10(10ma) 82 (81) 188 f fdc05-48d05 (w) 36 ~ 75 (18 ~ 75) vdc 5 vdc 0ma 500ma 50mvp-p 10(5ma) 78 (78) 850 f fdc05-48d12 (w) 36 ~ 75 (18 ~ 75) vdc 12 vdc 0ma 230ma 50mvp-p 10(10ma) 81 (81) 140 f fdc05-48d15 (w) 36 ~ 75 (18 ~ 75) vdc 15 vdc 0ma 190ma 50mvp-p 10(10ma) 81 (81) 47 f 1. all dimensions in inch (mm) tolerance: x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 2. pin pitch tolerance 0.01 (0.25) 3. pin dimension tolerance 0.004 (0.1) note 1. mil-hdbk-217f @ta=25 oc, full load. 2. typical value at nominal input and full load. (2 0mhz bw.) 3. typical value at nominal input and no load. 4. typical value at nominal input and full load. 5. test by minimum input and constant resistive loa d. 6. the ctrl pin voltage is referenced to -input to order positive logic on/off control add the suff ix-p (ex: fdc05-48s05-p) to order negative logic on/off control add the suff ix-n (ex: fdc05-48s05-n) 7. m1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and m2 version. 8. heat-sink is optional and p/n: 7g-0020c-f. 9. an external input filter capacitor is required i f the module has to meet en61000-4-4, en61000-4- 5. the filter capacitor power mate suggest: nippon che mi-con ky series, 220 f/100v. caution: this power module is not internally fused. an inpu t line fuse must always be used.
|
